Gravimetric Feeder – NX-S/NX-T series
Kubota’s Gravimetric Feeder – NX feeder is an unique Feeder with Innovative design which helps to handle wide range of materials with High performance.
- High Feeding Accuracy: from Digital load cell to Feeder all we manufacture in Japan.
- Easy Maintenance Design
- Demonstration is available with real machine at our FTC.
Stable control by Diagonal Agitator
Agitator is placed diagonally and rotates very close to Hopper which gives less effect on weight value, it realizes stable feeding.
Negative Wall Angle Structure
Improvement of Anti Bridging function because material compression is decreased by negative wall angle design, it helps to handle wide material applications.
High Screw Fill of Material
This structure Increases high screw fill of material as agitator pushes material into screw part. Compared to our conventional equipment, it achieves accurate and constant material flow.
|Fluff/ Crushed Film / Crushed sheet||Medium||++||++|
|Filler/ CaCO3 / Talc||Medium||+||++|
|Pigment / Carbon black||Strong||+||++|
‘++: Suitable, +: Possible, +*: Material Input Limitation.
|Feeder||Twin Screw feeder||Single Screw feeder||Twin Screw feeder|
|Flow rate range||10ml – 10L/h||2 – 300L/h||30 – 2000L/h||1 – 300L/h||10 – 2000L/h|
|Drive unit||Sensoriess servo motor|
|weighting unit||Digital load cell|
|Meterials||Parts in contact with bulk meterials are SUS304. Others are general industrial meterials|
|Control Module||KF-CM + KF-D20||KF-CM + KF-D70||KF-CM + KF-D150||KF-CM + KF-D70||KF-CM + KF-D150|
|Weight||Approx. 50g||Approx. 90g||Approx. 151g||Approx. 92g||Approx. 157g|
|Power supply||AC200-240V = 10%. Single phase (50Hz / 60Hz)|
*For More Informations Click Here